Sony DSC-HX1 - Manual (Page 129)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
129 GB
Viewing images on a TV with SD
(Standard Definition)
You can view images on a TV with SD (Standard Definition) by connecting the camera to a TV.
The connection varies according to the type of TV the camera is connected to.
Refer also to the operating instructions supplied with the TV.
1 Turn off both the camera and the TV
2 Connect the camera to the TV with the cable for multi-use terminal
(supplied)
3 Turn on the TV and set the input
4 Press (Playback) button to turn on the camera
Images shot with the camera appear on the TV. Select the desired image with the control
button.
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 116).
• The shooting image will not be displayed on the TV when the movie is shot under the condition of the
camera and TV connected.
• When output to TV, easy viewing is invalid.
Viewing images by connecting the camera to a TV
with the supplied cable for multi-use terminal
Notes
1 To audio/video input jacks
Cable for multi-use
terminal (supplied)
VIDEO
Yellow
AUDIO
(Playback) button
2 To the multi connector
Red
White