• For movies, you can set [Continuous] or [Off] only. The default setting for movies is [Continuous].
• The battery charge is used up more quickly in [Continuous] mode than in [Shooting] mode.

(Shooting)

Activates the anti-blur function when pressing the shutter button
halfway down.

(Continuous)

Always activates the anti-blur function. You can stabilize images
even when zooming up a far subject.

(Off)

Does not use anti-blur mode.

Notes

Hints for preventing blur

The camera moved accidentally when you took the image. This is called “Camera shake.”
On the other hand, if the subject moved when you took the image, it is called “subject blur.”
Besides, camera shake and subject blur occur frequently under low-light or slow shutter
speed conditions, such as those encountered in

(Twilight Portrait) or (Twilight) mode.

In such case, shoot with the below tips in mind.

Camera shake

Your hands or body shake while you hold the
camera and press the shutter button, and the
entire screen is blurred.

• Use a tripod or place the camera on a flat surface to

hold the camera steady.

• Shoot with a 2-second delay self-timer and

stabilize the camera by holding your arms firmly at your side after pressing the shutter button.

Subject blur

Even though the camera is steady, the subject
moves during the exposure so the subject is shot
blurred when the shutter button is pressed.
Camera shake is reduced automatically using
the anti-blur function. However, the function
does not effectively reduce subject blur.

• Select

(Anti Motion Blur) and

(High Sensitivity) mode in Scene Selection.

• Select a higher ISO sensitivity to make the shutter speed faster, and press the shutter button before

the subject moves.

Advertising

Popular Brands

Popular manuals