Sony DSC-HX1 - Manual (Page 161)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
161 GB
The power is on, but the camera does not work.
• The built-in microcomputer is not working properly. Remove the battery pack, and then, after one
minute, insert the battery pack and turn on the camera. If this does not work, reset the camera
(pages 15 and 152).
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using
it.
The camera turns off with the lens portion extended.
• The battery pack is discharged. Replace it with a charged battery pack, then turn the camera on again.
• Do not attempt to force the lens that has stopped moving.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The clock set screen appears when you turn on the camera.
• Set the date and time again (page 128).
• The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for
24 hours or more with the power left off.
You want to change the date or time.
• Change the settings by MENU t [Settings] t [Clock Settings] t [Date & Time Setting].
The date or time is incorrect.
• The Area Setting is set to a different location than your current location. Change the setting by
MENU t [Settings] t [Clock Settings] t [Area Setting].
The image taken in high-zoom is distorted.
• The image may become distorted when the weather is unstable, due to haze. This is not a malfunction.
Because the image cannot be checked during recording, Sony recommends playing back the image
magnified on the screen to check after the recording is finished.
Others