Sony DSX-S200X User Manual

Page 31

Advertising
background image

31

The Auto Off function does not operate.

The unit is turned on. The Auto Off function activates
after turning off the unit.
t Turn off the unit.

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• The connection is not correct.

t Connect a power antenna (aerial) control lead

(blue) or accessory power supply lead (red) to the
power supply lead of a car’s antenna (aerial)
booster (only when your car has built-in FM/AM
antenna (aerial) in the rear/side glass).

t Check the connection of the car antenna (aerial).
t If the auto antenna (aerial) will not go up, check

the connection of the power antenna (aerial)
control lead.

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Set “Local on” (page 26).

t Tuning does not stop at a station:

Set “Local off” (page 26).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set “Mono on” (page 26).

An FM program broadcast in stereo is heard in
monaural.

The unit is in monaural reception mode.
t Set “Mono off” (page 26).

RDS

PTY displays “- - - - - - - -.”

• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the program type.

USB playback

You cannot play back items via a USB hub.

This unit cannot recognize USB devices via a USB
hub.

Cannot play back items.

A USB device does not work.
t Reconnect it.

The USB device takes longer to play back.

The USB device contains files with a complicated tree
structure.

The display items do not scroll.

• A large number of characters may not scroll.
• “Auto Scroll” is set to “off.”

t Set “Auto Scroll on” (page 26).
t Press and hold (DSPL) (SCRL).

A beep sounds.

During playback, the USB device has been
disconnected.
t Before disconnecting a USB device, make sure to

stop playback first for data protection.

The sound is intermittent.

The sound may be intermittent at a high-bit-rate of
more than 320 kbps.

Advertising