Sony PCV-LX810 - Manual (Page 23)

Welcome
23
Your VAIO Pen, eraser, and the upper/lower switch positions are programmable.
By default, the basic functions performed by the VAIO Pen are:
❑ Pointing — Place the tip of the pen anywhere on the pen tablet screen and
the screen cursor will automatically correspond to that point.
❑ Clicking — Tap the pen tablet screen once with the tip of the pen, or press
the pen tip against the screen with enough pressure to register a single click.
❑ Double clicking — Quickly tap the pen tablet screen twice in the same place
with the tip of the pen. You can also register a double click by pressing the
upper switch position of the pen’s rocker switch.
❑ Dragging — Point to and select an object by pressing the pen to the pen
tablet screen. Slide the pen tip across the tablet to move the object to the
desired location. To select text, point to the beginning of the text, and then
drag the pen across the tablet until all of the desired text is highlighted.
To replace the Pen tip
Your VAIO Pen is supplied with pen tip replacements. The pen tip wears with
normal use and must be replaced when the tip becomes too short or develops a
flat point. Follow these steps to replace the pen tip:
1 Eraser
Delete unwanted portions of your work, depending on the application in use.
2 Upper switch position
The upper side of the rocker switch is set to deliver a double left click by default.
3 Lower switch position
The lower side of the rocker switch is set to deliver a right click by default.
4 Pen tip
You can use the pen tip to draw or write. Tapping the pen tip against the tablet screen
delivers a click in the same manner as the left button on a mouse.