Sony WX-4500X - Manual (Page 13)

13
Playing specific tracks only
You can select:
• Bank on — to play the tracks with the “Play”
setting.
• Bank inv (Inverse) — to play the tracks with
the “Skip” setting.
1
During playback, press (MENU) , then
rotate the jog roller until “Bank on,”
“Bank inv,” or “Bank off” appears.
2
Press (SEEK/AMS +) repeatedly until
the desired setting appears.
3
Push the jog roller.
Playback starts from the track following the
current one.
To return to normal play mode, select “Bank off”
in step 2.
Cassette Player
Listening to a tape
Insert a cassette.
Playback starts automatically.
If a cassette is already inserted, press (SOURCE)
repeatedly until “FORWARD B” or
“REVERSE b” appears to start playback.
FORWARD B: The side facing up is played.
REVERSE b: The side facing down is played.
Tip
To start playback during fast-forward or rewind, press
(MODE) ( o ).
Note
The AMS function may not work when:
– the blanks between tracks are shorter than 4
seconds.
– there is noise between tracks.
– there are long sections of low volume or quiet
sections.
To Press
Change the tape’s
playback direction (MODE) (o)
Stop playback (OFF)
Eject the cassette TAPE Z
Skip tracks
– Automatic
Music Sensor
(SEEK/AMS) (./>)
[once for each track]
Fast-forward/
Rewind (SEEK/AMS) (m/M)
[hold for 2 seconds]