Sony WX-4500X - Manual (Page 18)

18
*1 Only if the corresponding optional equipment is
connected.
*2 If your car has no ACC (accessory) position on the
ignition key switch, be sure to press
(OFF) for 2
seconds to turn off the clock indication after turning
off the ignition.
By rotating the control
Rotate and release to:
– Skip tracks on the disc.
– Locate the beginning of tracks on the tape.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Fast-wind the tape.
– Find a station manually.
Tip
To start playback while fast-winding the tape, press
(MODE) .
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change the disc*.
* When an optional CD/MD unit is connected.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of these
controls with the unit (see “Changing the sound and
display settings” on page 19).
SEEK/AMS
control
PRESET/
DISC control
To increase
To decrease