Sony HT-DDW960 - Manual (Page 15)

Gettin
g
Star
ted
masterpage:Right
lename[E:\SEM_Janet\Data_HT-
DDW960\J9040000_4255298611DDW960US\4255298611\GB03CON_HT-DDW960-U.fm]
model name1[HT-DDW960]
[4-255-298-61(1)]
15 US
Connect your speakers to the receiver. This receiver allows you to use a 6.1 channel speaker system.
To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a
center speaker, and two surround speakers) and a sub woofer (5.1 channel).
You can enjoy high fidelity reproduction of DVD software recorded in the Surround EX format if you
connect one additional surround back speaker (6.1 channel) (see “Selecting the surround back decoding
mode” on page 29).
Example of 6.1 channel speaker system configuration
Tips
• When you connect 6.1 channel speaker system, place the surround back speaker behind the listening position.
• Since the sub woofer does not emit highly directional signals, you can place it wherever you want.
• For greater flexibility in the positioning of the speakers, use the optional WS-FV11 or WS-FV10D floor stand
(available only in certain countries).
Note
Connect the long speaker connecting cords to the surround and surround back speaker terminals and the short speaker
connecting cords to the front and center speaker terminals.
Attaching foot pads
To prevent speaker vibration or movement, attach the supplied foot pads to the speaker as shown in the
illustration below.
Note
Be sure to attach the supplied foot pads to the sub woofer as well.
3: Connecting speakers
Front speaker (Right)
Surround speaker (Right)
Center speaker
Front speaker (Left)
Sub woofer
Surround speaker (Left)
Surround back speaker
continued
GB01COV_HT-DDW960-U.book Page 15 Thursday, April 15, 2004 6:05 PM