Sony HT-DDW960 - Manual (Page 21)

Ampl
ifier O
p
e
ration
masterpage:Right
lename[E:\SEM_Janet\Data_HT-
DDW960\J9040000_4255298611DDW960US\4255298611\GB04BSC_HT-DDW960-U.fm]
21 US
model name1[HT-DDW960]
[4-255-298-61(1)]
1
Press input buttons to select the input.
The selected input appears in the display.
2
Turn on the component and start
playback.
Note
If you select the VCR or DVD player, set the
TV’s video input to match the component you
selected.
3
Turn MASTER VOLUME –/+ to adjust
the volume.
Note
To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.
To mute the sound
Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.
To use the headphones
Connect the headphones to the PHONES jack.
• When the headphones are connected, speaker
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
• When the headphones are connected, you can
select only the following sound fields
(page 28).
– HP 2CH (HEADPHONE 2CH)
– HP MULTI (HEADPHONE MULTI)
– HP THEA (HEADPHONE THEATER)
Amplifier Operation
Selecting the component
To select the Press
VCR VIDEO 1 or
VIDEO 2
Satellite tuner VIDEO 2
DVD player DVD
MD or tape deck MD/TAPE
Super Audio CD or
CD player SA-CD/CD
Built-in tuner (FM/AM) TUNER FM/AM
GB01COV_HT-DDW960-U.book Page 21 Thursday, April 15, 2004 6:05 PM