Sony HT-DDW960 - Manual (Page 33)

A
d
v
a
n
ce
d A
d
ju
stm
e
nts
and
Settin
g
s
masterpage:Right
lename[E:\SEM_Janet\Data_HT-
DDW960\J9040000_4255298611DDW960US\4255298611\GB06ADV_HT-DDW960-U.fm]
33 US
model name1[HT-DDW960]
[4-255-298-61(1)]
You can adjust the tonal quality (bass, treble
level) of the front speakers using the TONE
menu.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
2
Press MAIN MENU repeatedly to select
“
TONE ”.
3
Press or repeatedly to select the
parameter you want to adjust.
For details, see “TONE menu parameters”
below.
4
While monitoring the sound, press + or
– repeatedly to select the setting you
want.
The setting is entered automatically.
5
Repeat steps 3 and 4 to adjust the other
items.
Note
You cannot adjust the tone when the receiver is
decoding signals with a sampling frequency of more
than 48 kHz, or when DTS-ES Matrix or DTS Neo:6
decoding is applied.
TONE menu parameters
x BASS XX dB
(Front speaker bass level)
x TREB. XX dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from –6 dB to +6 dB in 1 dB steps.
Using the CUSTOMIZE menu
to adjust the receiver
You can adjust various receiver settings using
the CUSTOMIZE menu.
1
Press MAIN MENU repeatedly to select
“
CUSTOM ”.
2
Press or repeatedly to select the
parameter you want to adjust.
For details, see “CUSTOMIZE menu
parameters” below.
3
Press + or – repeatedly to select the
setting you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 to adjust the other
items.
CUSTOMIZE menu parameters
The initial settings are underlined.
x SB XXXX
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the
surround back decoding mode (page 29).
For details on each decoding mode, see page 30.
• AUTO
• MTRX
• OFF
Note
This parameter is valid only in the A.F.D. mode
(page 26).
Adjusting the tone Advanced settings
continued
GB01COV_HT-DDW960-U.book Page 33 Thursday, April 15, 2004 6:05 PM