AT&T 272 - Manual (Page 11)

9
Switching Between Lines During a Call
During a call on one line, you can make or answer a call on the other line by
pressing
H. You can use the H and line buttons (L and l) to
switch back and forth between calls as often as necessary.
For example, if you’re using Line 1 and Line 2 rings:
1 Press H to hold Line 1.
2 Press l to answer the other call.
3 Press L to hang up Line 2 and return to your first call
— OR —
Press
H to hold Line 2, and press L to return to your first call.
Conference Calls
You can use both lines at the same time to set up a three-way conference call.
1 Make or answer a call and press H.
2 Establish a call on the other line.
3 Press F.
4 Hang up to end a conference call.
If one caller hangs up during a conference call, you might hear a dial tone.
Press the line button of the remaining call to disconnect the other line and
eliminate the dial tone.
NOTE: Under certain circumstances, the other parties on a conference call
may not hear one another clearly.
Conference Call Options
Placing a Conference Call on Hold
1 Press H to hold both lines.
2 Press F to release Hold and continue your conference call.
Talking Privately with One Caller
1 Press H.
2 Press the line button of the person with whom you want to speak
privately.
3 Press F to continue your conference call.
TELEPHONE OPERATION