AEG BP5003021 - Manual (Page 11)

Display
1 Timer
2 Heating Up / Residual heat indicator
3 Water tank (selected models only)
4 Core temperature sensor (selected
models only)
5 Door lock (selected models only)
6 hr / min
7 Clock functions
1 7 2 3
4 5 6 7
Buttons
Button Function Description
CLOCK To set the clock function.
, MINUS, PLUS To set a value for time
MINUTE MINDER To set the minute minder. To switch ON/OFF
light in oven cavity, hold button more than 3
seconds
TEMPERATURE To check temperature inside the oven cavity.
To check the Core Temperature Sensor tem-
perature, when is connected (if applicable).
Use only when the oven function is set.
Heat-up / Residual heat indicator
If you activate an oven function, the bars in the display come on one by one. The bars
show that the oven temperature increases or decrease.
CLOCK FUNCTIONS
SYMBOL FUNCTION DESCRIPTION
MINUTE MINDER Use to set a countdown time. This function has no effect on
the operation of the oven.
TIME OF DAY To set, change or control the time of day. Refer to 'Setting the
time of day'.
DURATION Use only when the oven function is set to set how long the
oven operates.
END Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
matically later.
Press again and again to switch between the clock functions.
Clock functions 11