Sony STR-DG720 - Manual (Page 27)

27 US
Ge
tting Star
te
d
6: Preparing the receiver
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
3
Press MEMORY/ENTER.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Connecting the AC power cord
(mains lead)
NT B
FRONT A
L
L
R
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
?/1
AUTO CAL MIC
SPEAKERS (OFF/A/B)
PHONES VIDEO 2 IN/PORTABLE AV IN
VIDEO L AUDIO R
MEMORY/ ENTER CATEGORY MODE CATEGORY
TUNING
2CH A.F.D. MOVIE MUSIC ANALOG DIRECT MUTING
DISPLAY INPUT MODE
INPUT SELECTOR
MASTER VOLUME
TUNING MODE
1,2
3