Sony STR-DG720 - Manual (Page 56)

56 US
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press ANALOG DIRECT on the
receiver.
The analog audio is output.
To cancel ANALOG DIRECT
Press ANALOG DIRECT on the receiver
again.
You can also press any sound field buttons.
Notes
• When headphones are connected, “HP DIR”
appears on the display.
• This function is not available when DMPORT, XM
RADIO and BD input is selected.
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
“S.F. CLR.” appears on the display and
all sound fields are reset to their initial
setting.
?/1
AUTO CAL MIC
SPEAKERS (OFF/A/B)
PHONES VIDEO 2 IN/PORTABLE AV IN
VIDEO L AUDIO R
MEMORY/ ENTER CATEGORY MODE CATEGORY
TUNING
2CH A.F.D. MOVIE MUSIC ANALOG DIRECT MUTING
DISPLAY INPUT MODE
INPUT SELECTOR
MASTER VOLUME
TUNING MODE
1 2 Sound field
buttons
?/1
AUTO CAL MIC
SPEAKERS (OFF/A/B)
PHONES
VIDEO 2 IN/PORTABLE AV IN
VIDEO L AUDIO R
MEMORY/ ENTER CATEGORY MODE CATEGORY
TUNING
2CH A.F.D. MOVIE MUSIC ANALOG DIRECT MUTING
DISPLAY INPUT MODE
INPUT SELECTOR
MASTER VOLUME
TUNING MODE
1,2
2