Sony DCR-IP1 - Manual (Page 19)

Managing pictures on a Windows computer
Mana
gi
ng
pi
ct
ur
es on
a
Wi
nd
ow
s comp
ut
er
19
Managing pictures on a Windows computer
Copying and viewing
pictures recorded on
a tape
You can play or edit pictures on your
computer without connecting the camcorder
each time, by copying the pictures recorded
on your tape to the computer.
If your camcorder is a MICROMV format
model, you can also edit the pictures with the
supplied CD-ROM (MovieShaker Ver.3.1
for MICROMV). For details, refer also to the
separate MovieShaker Application Guide
supplied with your camcorder.
For Windows 2000/Windows XP
Log on as Administrators.
Copying movies onto your
computer
Before following the procedures below,
make sure you have installed ImageMixer
Ver.1.5 for Sony on your computer.
The maximum length of movies you can copy
on a computer varies from 10 to 20 minutes,
depending on the computer environment.
1
Prepare the power source for your
camcorder, then insert a cassette into
your camcorder.
2
Start up the computer, then double-
click [ImageMixer Ver.1.5 for Sony]
on the desktop.
3
Click (Capture Environment).
4
Click (USB Device Capture
Mode) if you are connecting via a USB
cable, or click
(DV Camcorder
Capture Mode) if you are connecting
via an i.LINK cable (DV format
models only).
5
On your camcorder, slide the POWER
switch repeatedly to select the PLAY/
EDIT mode.
, continued