Sony DCR-IP1 - Manual (Page 45)

Additional information
Ad
d
itio
n
a
l in
fo
rm
a
tio
n
45
Images from analog equipment
are not displayed on the
computer screen when the signal
convert function is being used. cClick (Preference) at the upper right-hand corner of the
ImageMixer screen, check [Capture using DV Cam.] in [DVC
Capture settings], then click [OK].
There is no sound when the
camcorder is connected to the
computer via a USB cable. • Sound is not supported on Windows 98.
cChange the settings for your computer environment as described
in the following procedures:
1 Double-click [ImageMixer Ver.1.5 for Sony] on the
desktop.
2 Click (Capture Environment).
3 Click (USB Device Capture Mode), then click
(Preference).
4 Select another device from the pull-down menu of [Sound
capture device], then click [OK].
5 Close ImageMixer Ver.1.5 for Sony, then restart it.
If the problem is not solved, repeat the procedure above.
The image displayed on the
computer is distorted. cAdjust the image quality with the slider to view images with a
large amount of data. Adjusting the slider to the left reduces the
noise, but the image quality deteriorates.
b Note
• The picture goes dark while the adjustment takes place after you click the
slider.
Symptom Cause and/or Corrective Actions
Slider
, continued