Sony DCR-IP1 - Manual (Page 42)

Additional information 42
The image does not appear on
ImageMixer Ver.1.5 for Sony
when using the USB cable.
(Continued from the previous
page) For Windows 2000
Log on as Administrators.
1 Check that your camcorder is connected to a computer.
2 Right-click [My Computer], then click [Properties].
The [System Properties] screen appears.
3 Click the [Hardware] tab.
4 Click [Device Manager].
5
Click [View], then click [Devices by type].
6 If other devices below are already installed, right-click
them, then click [Remove] to delete them.
For copying and viewing pictures recorded on a
tape
• [USB Composite Device] or [Sound, video and game
controllers] in the [Universal Serial Bus Controller] folder
• [Composite USB Device] in the [USB Audio Device] folder
• [Composite USB Device] in the [Other devices] folder
For copying and viewing pictures recorded on a
“Memory Stick”
• [? Sony Handycam] or [? Sony DSC] with a “?” mark in the
[Other devices] folder
7 When the [Confirm Device Removal] screen appears,
click [OK].
8 Turn off the power of your camcorder, disconnect the
USB cable, then restart the computer.
9 Re-install the USB driver (p. 8).
b Note
• Deleting anything other than [USB Composite Device], [Sound, video
and game controllers], [Composite USB Device], [? Sony Handycam]
and [? Sony DSC] may cause malfunction of your computer.
Symptom Cause and/or Corrective Actions