Sony DCR-IP1 - Manual (Page 2)

2
Read this first
On image capture/editor software
You can edit pictures recorded on a tape or
“Memory Stick” using the supplied CD-ROM
(image capture/editor software). The software
used differs depending on the picture to be
edited. See below.
This manual describes how to edit pictures with
ImageMixer and Image Transfer*. If your
camcorder is a MICROMV format model, refer
to the separate MovieShaker Application Guide
supplied with your camcorder.
If your camcorder is a DV format model
• When editing pictures on a tape: ImageMixer
1)
• When editing pictures on a “Memory Stick”:
ImageMixer 1) 2)
If your camcorder is a MICROMV format
model
• When editing pictures on a tape:
ImageMixer
1)
, MovieShaker
1)
• When editing pictures on a “Memory Stick”:
ImageMixer 1) 2)
1)
for Windows computer
2)
for Macintosh computer
* Use Image Transfer to copy still pictures from your
camcorder to a computer (Windows computer
only).
System requirements for using
ImageMixer Ver.1.5 for Sony
When viewing pictures recorded on a
tape on a computer
b Note
• When you connect your camcorder to a Macintosh
computer using a USB cable, you cannot view
pictures recorded on a tape on the computer screen.
• OS: Microsoft Windows 98SE, Windows
2000 Professional, Windows Millennium
Edition, Windows XP Home Edition or
Windows XP Professional
Standard installation is required.
Operation is not assured if the above OS has
been upgraded.
You cannot hear sound if your computer is
running Windows 98. You can only transfer
and view still images.
• CPU: Intel Pentium III 500 MHz or faster
(800 MHz or faster recommended)
• Application: DirectX 8.0a or later (This
product is based on DirectX technology. It is
necessary to have DirectX installed.)
• Sound system: 16 bit stereo sound card and
stereo speakers
• Memory: 64 MB or more
• Hard disk:
Available memory required for installation:
250 MB or more
Available free hard disk space recommended:
1 GB or more (depending on the size of the
image files edited)
• Display: 4 MB VRAM video card, Minimum
800 × 600 dots, High color (16 bit color,
65 000 colors), DirectDraw display driver
capability (this product will not operate
correctly at 800 × 600 dots or less, and 256
colors or less.)
• Others: USB port (this must be provided as
standard), DV Interface (to connect via an
i.LINK cable, DV format models only), disc
drive (you need a CD-R drive to create a
Video CD.)
• For camera operations, read the separate
Camera Operations Guide supplied with
your camcorder.
• If your camcorder is a MICROMV format
model, read also the separate MovieShaker
Application Guide supplied with your
camcorder.