Sony STR-DH820 - Manual (Page 72)

72 GB
D:\SONY job\STR-DH820_PMRF_02\GB\4266497121\GB05ENJ_STR-DH820-CEL.fm masterpage: Left
STR-DH820
4-266-497-11(2)
• Theater: Theater type (default setting)
mixes reflection and reverberation sound
creating the characteristics of a mastering
studio. Additionally, this type mixes in
frequency characteristics that are often
found in professional studios and movie
theaters. It is ideal for watching movies in
a listening room that has less
reverberation.
• Studio: In Studio type, effects are kept to
a minimum, while still providing a great
theater experience. This type provides the
accuracy of the original recording.
EQ Settings menu
You can use the following parameters to adjust
the tonal quality (bass/treble level) of front
speakers.
• Bass
• Treble
Note
This function does not work when “A. DIRECT” is
being used.
Audio Settings menu
You can adjust settings for the audio to suit
your preference.
x D.L.L. (Digital Legato Linear)
The D.L.L. function is Sony proprietary
technology that allows low quality digital
audio signals and analog audio signals to be
played back with high quality sound.
• AUTO 1: This function is available for lossy
compression audio formats and analog audio
signals.
• AUTO 2: This function is available for
Linear PCM signals, as well as lossy
compression audio formats and analog audio
signals.
• OFF
Note
This function works when “2CH ST.”,
“A.F.D. AUTO”, “MULTI ST.” or “HP 2CH” is
selected. However, this function does not work in
the following cases.
– Linear PCM signals with a sampling frequency of
other than 44.1 kHz are being received.
– Dolby Digital Plus, Dolby Digital EX, Dolby
TrueHD, DTS 96/24, DTS-HD Master Audio, or
DTS-HD High Resolution Audio signals are being
received.
x A/V Sync (Synchronizes audio
with video output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
• HDMI AUTO: The time gap between audio
output and visual display for the monitor
connected via an HDMI connection will be
adjusted automatically based on the
information for the TV. This feature is
available only when the monitor supports
the A/V Sync function.
• 0 ms – 300 ms: You can adjust the delay
from 0 ms to 300 ms in 10 ms intervals.
Level
(dB)
Bass Treble
Frequency
(Hz)