Inserting batteries into the remote control – Sony STR-DH820 User Manual

Page 8

Advertising
background image

8

GB

D:\SONY job\STR-DH820_PMRF_02\GB\4266497121\GB01COV_STR-DH820-CELTOC.fm

masterpage: Left

STR-DH820

4-266-497-11(2)

Insert two R6 (size AA) batteries (supplied) by
matching 3 and # on the batteries to the
diagram inside the battery compartment of the
remote control.

Notes

• Do not leave the remote control in an extremely hot

or humid place.

• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of

batteries.

• Do not expose the remote control sensor to direct

sunlight or lighting apparatuses. Doing so may
cause a malfunction.

• If you do not intend to use the remote control for an

extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.

• When you replace or remove the batteries, the

programmed codes may be cleared. If this happens,
reprogram the remote control (page 80).

• When the receiver no longer responds to the

remote control, replace all the batteries with new
ones.

Inserting batteries into the
remote control

Advertising