Sony ILCE-7S - Manual (Page 103)

Cont. Bracket: 3.0EV 5 Images:
This setting shoots five images continuously with an exposure value shifted by plus or minus
3.0 EV.
Note
The last shot is shown on the Auto Review.
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by
adjusting the ISO value. If a setting other than [ISO AUTO] is selected, the exposure is
changed by adjusting the shutter speed.
When you adjust the exposure, the exposure is shifted based on the compensated value.
When the flash is used, the product performs flash bracket shooting, which shifts the
amount of flash light even if [Cont. Bracket] is selected. Press the shutter button for each
image.
[100] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Single Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and
then to lighter.
Press the shutter button for each image. You can select an image that suits your purpose
after recording.
1. MENU
→ (Camera Settings) → [Drive Mode] → [Single Bracket].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Single Bracket: 0.3EV 3 Image (default setting):
This setting shoots a total of three images in a row with an exposure value shifted by plus or
minus 0.3 EV.
Single Bracket: 0.3EV 5 Image:
This setting shoots a total of five images in a row with an exposure value shifted by plus or
minus 0.3 EV.
Single Bracket: 0.5EV 3 Image:
This setting shoots a total of three images in a row with an exposure value shifted by plus or
minus 0.5 EV.
Single Bracket: 0.5EV 5 Image: