Sony ILCE-7S - Manual (Page 96)

[88] How to Use Using shooting functions Adjusting the exposure
Exp.comp.set
Sets whether to apply the exposure compensation value to control both flash light and
ambient light, or just ambient light.
1. MENU
→
(Custom Settings)
→ [Exp.comp.set] → desired setting.
Menu item details
Ambient&flash (default setting):
Applies the exposure compensation value to control both flash light and ambient light.
Ambient only:
Applies the exposure compensation value to control ambient light only.
[89] How to Use Using shooting functions Adjusting the exposure
Zebra
The zebra pattern will appear over the part of an image if the brightness level exceeds the
IRE that you set. Use this zebra pattern as a guide to adjust the brightness.
1. MENU
→
(Custom Settings)
→ [Zebra] → desired setting.
Menu item details
Off (default setting):
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+:
Adjusts the brightness level.
Note
The zebra pattern is not displayed during HDMI connection.
[90] How to Use Using shooting functions Adjusting the exposure
Exposure Set. Guide