Sony ILCE-7S - Manual (Page 162)

When [ TC Output] is set to [On], the image may not be output properly to the TV or
recording device. In such cases, set [ TC Output] to [Off].
[183] How to Use Viewing Viewing images on a TV
Viewing images on a “BRAVIA” Sync-compatible TV
By connecting this product to a TV that supports “BRAVIA” Sync using an HDMI cable (sold
separately), you can operate this product with the TV Remote Control.
1. Turn off both this product and the TV.
2. Connect the HDMI micro terminal of the product to the HDMI jack of the TV using an
HDMI cable (sold separately).
3. Turn on the TV and switch the input.
4. Turn on this product.
5. MENU
→
(Setup
) → [HDMI Settings] → [CTRL FOR HDMI] → [On].
6. Press the SYNC MENU button on the TV Remote Control, and select the desired mode.
Note
If the product is not in playback mode, press the (Playback) button.
Only TVs that support “BRAVIA” Sync can provide SYNC MENU operations. For details,
refer to the operating instructions supplied with the TV.
If the product performs unwanted operations in response to the TV Remote Control when
the product is connected to another manufacturer’s TV using an HDMI connection, select
MENU
→
(Setup
) → [HDMI Settings] → [CTRL FOR HDMI] → [Off].