Recording to a tape – Sony MHC-GX8000 User Manual

Page 13

Advertising
background image

13

GB

MHC-RG77 4-238-409-11 (2)

Tape

Recording to a tape

–– CD Synchro Recording/High Speed Dubbing/Recording Manually/

Program Edit

You can record from a CD, tape, radio or other connected component. The recording level is adjusted
automatically.

Recording from a tape
(High-Speed Dubbing)

Recording from a CD

(CD Synchro Recording)

Recording Manually

Insert a recordable tape into deck B.

Press TAPE A/B repeatedly
to select TAPE A.

Press CD.

Press a function button
for the recording source.

Load the tape you want to
record into deck A.

Load the CD you want to
record.

Load the CD or tape
(or other audio
sources), or tune to the
station you want to
record.

Press CD SYNC HI-DUB.

Press REC PAUSE/
START.

DECK B stands by for recording.

REC PAUSE/START indicator flashes.

Press DIRECTION repeatedly to select g to record on one side.
Select
j (or RELAY) to record on both sides.

Press REC PAUSE/START. If you are recording manually, press hH to start
playing the source (for CD or Tape).

Recording starts.

Tips

• When you record on both sides, be sure to start

from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.

• For recording from the reverse side:

After step 1, press TAPE A/B to select deck B and
press hH twice to start playback of the reverse
side. Press x at the point where you want to start
recording. The TAPE B reverse side indicator lights
up.

• (High-Speed Dubbing only)

If you set direction to j when the tapes you use
have different lengths, the tapes in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.

• For recording from the radio:

If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.

Press x to stop recording.

Steps

1

2

3

4

5

6

7

• For recording from a CD to a tape manually:

You can press . or > to select tracks during
recording pause mode (after step 4 and before step
6).

• You can mix the sound from the component

connected to the GAME INPUT jacks with another
function such as CD, tape, radio or an MD
connected to this system. To record the mixed
sound, press GAME MIXING after step 4 of
“Recording Manually” and then press REC
PAUSE/START to start recording. Game Mixing
does not function during High-Speed Dubbing and
CD Synchro Recording.

Note

You cannot listen to other sources while recording.

continued

Advertising