Sony VPL-VW95ES - Manual (Page 20)

20
Step 2: Adjusting the Picture Position
Project an image on the screen and then adjust the picture position.
Tip
The
? / 1 (ON/STANDBY), INPUT, MENU, and M/m/</,/ (joystick) buttons on the side
panel of the projector function the same as those on the remote control. The LENS button functions
in the same way as the LENS ADJUSTMENT (FOCUS, ZOOM, SHIFT) button of the remote
control.
Depending on the installation location of the projector, you may not control it with the remote
control. In this case, point the remote control to the screen instead of the projector.
Note
1
After connecting the AC power
cord to the projector plug the
AC power cord into a wall outlet.
The ON/STANDBY indicator lights
in red and the projector goes into
standby mode.
ON/STANDBY indicator
Remote control detector
3, 4, 5
POSITION
button
2
1
? / 1 (ON/
STANDBY)
switch
Lights in red.