Sony VPL-VW95ES - Manual (Page 21)

21
C
o
n
nec
tio
n
s an
d Pr
epa
ra
tio
n
s
Adjust the lens by using buttons on the remote control or the control panel of the projector. Never
make adjustments by directly turning the lens with your hands, which may cause damage or
malfunction to the projector.
When adjusting the lens, each time you press the LENS button on the unit, the lens adjustment
function switches between “Lens Focus, Lens Zoom and Lens Shift”.
2
Press the ? / 1 (ON/STANDBY)
switch to turn on the projector.
The lens protector will open.
The ON/STANDBY indicator flashes
in green, and then lights in green.
When the ON/STANDBY indicator
flashes, “Starting...” appears on the
screen.
3
Adjust the focus.
Press the LENS ADJUSTMENT
(FOCUS) button to display the Lens
Focus adjustment window (test
pattern). Then adjust the focus of the
picture by pressing the
M/m/</,
buttons.
Tip
• When “Lens Control” is set to “Off” on
the Installation menu, you cannot
adjust the focus, the picture size or the
proper position by pressing the FOCUS,
ZOOM or SHIFT buttons (
1 page 63).
When “Test Pattern” is set to “Off” on
the Function
menu, the test pattern is
not displayed ( 1 page 62).
• The test signal is displayed for 1 minute.
Press the button to clear the test
signal display before that.
Note
Flashes in green for
a while (tens of
seconds) and then
lights in green.