Sony VPL-VW95ES - Manual (Page 39)

39
Pr
oj
ec
ting
The 3D glasses receive signals the 3D Sync Transmitter built into the front of the projector
and reflected to the glasses from the screen. When watching 3D video images using the
3D glasses, face squarely toward the screen.
1
Put on the 3D glasses.
2
Press the power button on the 3D
glasses.
The LED indicator lights up in green.
3
Turn toward the screen.
Precautions for use
• The 3D glasses receive, infrared signals sent by the 3D Sync Transmitter built into the front
of the projector and reflected to the glasses from the screen.
Mis-operation may occur if:
– The 3D glasses do not face the screen
– If there are objects blocking the path between the 3D glasses and the screen
– The viewing position is too far from the screen or the distance between the projector and
3D glasses is too great
– If the Anamorphic Zoom lens is mounted on the projector
– If there are other infrared communication devices nearby
• There are differences in perception of 3D video images among individuals.
• When the temperature of the usage environment is low, the 3D effect may be diminished.
3D glasses communication range
Figures A and B below indicate the communication range of the 3D glasses. If you try to
watch 3D video images from a distance greater than the communication range or install
the projector outside the communication range, the 3D glasses may not be able to display
the images properly. Also, the viable angles and distance vary depending on the screen
type, environment of the room, and installation environment of the projector.
Using the 3D Glasses
LED indicator Power button
IR sensor