Sony VPL-VW95ES - Manual (Page 81)

81
Oth
e
rs
Specifications
System
Projection system
SXRD panel, 1 lens, projection system
LCD panel
0.61-inch (15.4 mm)
SXRD panel 6,220,800 pixels
(2,073,600 pixels
× 3)
Lens 1.6 times zoom lens (motorized)
f=18.5 mm to 29.6 mm
F2.50 to F3.40
Lamp
200 W Ultra High Pressure Lamp
Projection picture size
40 inches to 300 inches (1,016 mm to
7,620 mm) (measured diagonally)
Acceptable video signals
15 kHz RGB/component 50/60 Hz,
Progressive component 50/60 Hz,
480/60i, 576/50i, 480/60p, 576/50p,
720/60p, 720/50p, 1080/60i, 1080/50i,
1080/24PsF (48i), 1080/60p (HDMI
input only), 1080/50p (HDMI input
only), 1080/24p (HDMI input only),
Composite video
Acceptable computer signals
fH: 19 kHz to 72 kHz
fV: 48 Hz to 92 Hz
Maximum resolution 1,920
× 1,080
(HDMI input only)
For details, see “Preset Signals” ( 1
page 83).
Input/Output
Y P B /C B P R /C R
Component: phono type
Y with Sync: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
P
B
/C
B
: 0.7 Vp-p±2 dB (75 ohms
terminated)
P
R
/C
R
: 0.7 Vp-p±2 dB (75 ohms
terminated)
HDMI
Digital RGB/Y C
B
(P
B
) C
R
(P
R
)
INPUT A
HD D-sub 15-pins
Analog RGB/component:
R/C
R
(P
R
): 0.7 Vp-p±2 dB
(75 ohms terminated)
G: 0.7 Vp-p±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
B/C
B
(P
B
): 0.7 Vp-p±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync input:
TTL level, positive/ negative
Horizontal sync input: TTL level,
positive/negative
VD: Vertical sync input: TTL
level, positive/negative
3D SYNC
RJ45 connector
IR IN
Minijack
TRIGGER
Minijack
Output impedance 1 kilohms
When “Trigger Select” is set to
“Power”
Power on: DC 12 V
Power off: 0 V
When “Trigger Select” is set to
“Anamorphic Zoom”
Anamorphic Zoom: DC 12 V
Other Wide Mode or Power off:
0 V
REMOTE
RS-232C: D-sub 9-pins (female)
General
Dimensions
470 mm
× 179.2 mm ×
484.9 mm (18
1
/
2
Ч 7 1
/
16
Ч
19
3
/
32
inches) (w/h/d)
Mass Approx. 11 kg (24 lb 4.0 oz)
Power requirements
AC 100 V to 240 V, 3.0 A to 1.3 A,
50/60 Hz
Power consumption
Max. 300 W
Standby mode: 8 W
Standby mode (low): 0.5 W
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote control RM-PJ21(1)
Size AA (R6) manganese batteries
(2)
AC power cord (1)
Operating Instructions (1)
CD-ROM (ImageDirector3) (1)
3D glasses (2)
Pouch for the 3D glasses (2)