Sony DCR-PC101 - Manual (Page 178)

178
Viewing images
Before operation
•You need to install the USB driver to view “Memory Stick” images on your computer.
(p. 168).
An application such as Windows Media Player must be installed to play back moving
pictures in Windows environment.
•Set USBCONNECT to NORMAL in the menu settings. (The default setting is
NORMAL.)
(1) Turn on your computer and allow Windows to load.
(2) Insert a “Memory Stick” into your camcorder, and connect the AC power
adaptor to your camcorder and then to a wall outlet.
(3) Set the POWER switch to MEMORY .
(4) Connect the (USB) jack on your camcorder with the USB port on your
computer using the supplied USB cable.
USB MODE appears on the screen of your camcorder.
(5) Open “My Computer” on Windows and double-click the newly recognized
drive (e.g. “Removable Disk (E:)”).
The folders inside the “Memory Stick” are displayed.
(6) Select and double-click the desired image file from the folder.
For the detailed folder and file name, see “Image file storage destinations and
image files” (p. 179).
* Copying a file to the hard disk of your computer before viewing it is recommended. If
you play back the file directly from the “Memory Stick,” the image and sound may
break off.
Viewing images recorded on a “Memory Stick”
on your computer – For Windows users
Desired file type Double-click in this order
Still image “Dcim” folder t “100msdcf” folder t Image file
Moving picture* “Mssony” folder t “Moml0001” folder t Image file*
(USB)
USB cable (supplied)
Push into the end
USB port