Sony DCR-PC101 - Manual (Page 76)

76
Your camcorder automatically searches for a desired scene having a tape counter value
of “0:00:00”. Use the Remote Commander for this operation.
(1) In playback, press DISPLAY on the Remote Commander if the counter is not
on the screen.
(2) Press ZERO SET MEMORY on the Remote Commander at the point you want
to locate later. The tape counter shows “0:00:00” and the ZERO SET MEMORY
indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape counter’s zero point. The tape stops
automatically when the tape counter reaches approximately zero. The ZERO
SET MEMORY indicator disappears and the time code appears.
(5) Press N. Playback starts from the counter’s zero point.
Notes
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function will be canceled.
• There may be a discrepancy of several seconds between the time code and the tape
counter.
• The ZERO SET MEMORY indicator disappears when you press FN.
If a tape has a blank portion in the recorded sections
ZERO SET MEMORY may not work correctly.
Quickly locating a scene – ZERO SET MEMORY
DISPLAY
m
x
N
ZERO SET MEMORY