Sony DCR-PC101 User Manual
Page 36
36
You can use these buttons to check the recorded picture or shot so that the transition
between the last recorded scene and the next scene you record is smooth.
END SEARCH
You can go to the end of the recorded section after you record.
(1) In standby, press FN to display PAGE1 (p. 22).
(2) Press END SCH.
The last five seconds of the recorded section are played back and your
camcorder returns to standby. You can monitor the sound from the speaker or
headphones.
To return to FN
Press EXIT.
To stop searching
Press END SCH again.
END SEARCH function
When you use a tape without cassette memory, END SEARCH does not work once you
eject the cassette after you have recorded on the tape. If you use a tape with cassette
memory, END SEARCH works even after you eject the cassette.
If a tape has a blank portion in the recorded sections
END SEARCH may not work correctly.
Checking the recording
– END SEARCH/EDITSEARCH/Rec Review
EDIT
1
FN