Sony KD-36FS130 - Manual (Page 12)

10
Re
m
o
te
Co
n
tr
o
l
qf POWER
buttons Press to turn on and off the TV and other audio/video
equipment you have programmed into the remote
control. For instructions, see “Programming the
Remote Control” on page 11.
qg FUNCTION
buttons Press to select the equipment (VCR/DVD, SAT/
CABLE
, TV) that you want to operate with the remote
control. The indicator (LED) lights up momentarily
when pressed to show which device the remote
control is operating.
qh VCR/DVD
(operating) Press to operate your VCR or DVD. The VCR or DVD
must be programmed into the remote control. For
instructions, see “Programming the Remote Control”
on page 11.
and
(to record)
Press the button and the button at the same
time to record programs with your VCR. The remote
control must be programmed before you can record.
m Rewind.
M Fast-forward.
Play.
x Stop.
X Pause. Press again to resume normal playback.
qj TV/VIDEO Press to cycle through available video inputs.
qk TV/SAT Press to switch between the TV and SAT (satellite)
inputs when in SAT FUNCTION mode.
Press for a direct selection of Effect settings (Simulated,
SRS, Off) when the remote is in TV FUNCTION mode.
See “Using the Audio Menu” on page 39 for details.
ql DISPLAY Press once to display the current time (if set) and the
program status such as channel number, Channel
Label (if set), video input, Video Label (if set), and Info
Banner (if set). Press again to turn off the display.
w; FAVORITES Press to display the analog or digital Favorite Channels
list, depending on the current tuning mode (analog or
digital).
wa and
ENTER
Press to change channels. The channel changes after
two seconds.
ws GUIDE D Press to display the digital program guide. For
details, see page 30.
wd Press the arrow buttons to move the cursor in the on-
screen menus. Press the center button to select an
option. (If no menu or display is shown, pressing the
center button displays the Favorite Channels list.)
wf MENU Press to display and exit the analog menu. For details,
see page 35. (To display the digital menu, see page 54.)
wg CH (channel) Press to change analog or digital channels, depending on
the current tuning mode (analog or digital). To scan
rapidly through the channels, press and hold down the
CH+
or CH- button.
D Indicates feature available only in digital tuning mode.
✍
If you lose your remote control, see page 60.
Button Description
0 9
01US01COV-BR2.book Page 10 Monday, March 28, 2005 1:36 PM