Sony KD-36FS130 User Manual
Page 25
23
C
onne
c
tions
Connecting a TV, VCR, and Satellite Receiver using
Component Video (Y P
B
P
R
)
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cables (not supplied), connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
6
Using component video cables (not supplied), connect Y P
B
P
R
OUT on your satellite
receiver to Y P
B
P
R
IN on your TV.
7
Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV.
Using your TV with this connection
❏
Program your Sony remote control to operate your VCR or satellite receiver (see
“Programming the Remote Control” on page 11).
❏
Turn on your VCR to enable your satellite receiver to work with this connection.
❏
To activate your remote, press the
FUNCTION
button to operate your VCR or the
FUNCTION
button to operate your satellite receiver.
❏
Press
repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO R
L
R
L
R
Y
B
P
P
R
VIDEO 1
From
cable/
antenna
VCR
4
2
Rear of TV
3
5
7
6
1
Satellite
Receiver
Audio L
Audio R (red)
Audio L (white)
Video (yellow)
Audio R
P
R
(red)
P
B
(blue)
Y (green)
(red)
(white)
01US01COV-BR2.book Page 23 Monday, March 28, 2005 1:36 PM