Sony KD-36FS130 - Manual (Page 20)

18
C
onne
c
ti
o
n
s
Connecting a TV and Cable Box
Some cable TV systems use scrambled or encoded signals that require a cable box to view all
channels. If you subscribe to such type of service, use this connection.
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TV with this connection
❏ Program your Sony remote control to operate your cable box.
❏ To activate your remote, press the FUNCTION button to operate your cable box. Then
use --9 buttons or CH+/- buttons to change the channels. In order to do this, first program
your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see
page 41).
VIDEO
LINE
OUT
AUDIO L AUDIO R
1
2
Rear of TV
Cable box
From cable/
antenna
01US01COV-BR2.book Page 18 Monday, March 28, 2005 1:36 PM