Sony KV-32HV600 - Manual (Page 24)

23
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Watch cable channels Press TV/VIDEO repeatedly to select the cable input (VHF/UHF in the
illustration).
Set up the TV remote control
to operate the VCR If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 43-44.
Activate the TV remote
control to operate the VCR Open the outside cover, as shown on page 42. Then set the A/V slide switch
to the position you programmed for the VCR.
Control VCR functions with
the TV remote control See “Operating a VCR” on page 60.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on pages 74-75.