Sony KV-32HV600 - Manual (Page 83)

82
O
ther
Inf
o
SETU
P
Wel
com
e
SETU
P
S
E
TU
P
SETU
P
Video
Audio
Problem Possible Remedies
No picture
(screen not lit), no sound ❏ If your TV does not turn on, and a red light keeps flashing, your TV may
need service. Call your local Sony Service Center.
❏ Make sure the power cord is plugged in.
❏ Press the POWER button on the front of the TV.
❏ Press the TV/VIDEO button to cycle through the connected video sources.
❏ Try another channel; it could be station trouble.
Dark, poor or no
picture (screen lit),
good sound ❏ Adjust the Picture option in the Video Menu (see page 64).
❏ Adjust the Brightness option in the Video Menu (see page 64).
❏ Check the antenna/cable connections.
No color ❏ Adjust the Color option in the Video Menu (see page 64).
Only snow and noise
appear on the screen ❏ Check the antenna/cable connections.
❏ Try another channel; it could be station trouble.
❏ Press ANT to change the input mode (see page 40).
Dotted lines
or stripes ❏ Adjust the antenna.
❏ Move the TV away from noise sources such as cars, neon signs, or hair-
dryers.
Double images or ghosts ❏ Using a highly directional outdoor antenna or a cable may solve the
problem.
“Black box” on screen ❏ You have selected a text option in the Setup Menu and no text is available.
(See page 74 to reset Setup selections.) To turn off this feature, set the
Caption Vision option to Off . If you were trying to select closed captioning,
select CC1 instead of TEXT 1-4 .
16:9 Enhanced feature ❏ If the Auto setting does not automatically detect the 16:9 signal from your
DVD player, select On to manually turn on the 16:9 Enhanced feature. For
details, see page 75.
Problem Possible Remedies
Good picture,
no sound ❏ Press MUTING so that the word Muting disappears from the screen (see page
40).
❏ Make sure the Speaker option is set to On in the Audio Menu (see page 67).
Cannot gain enough volume
when using a cable box ❏ Increase the volume of the cable box using the cable box’s remote control.
Then press
TV FUNCTION and adjust the TV’s volume.
Sound seems weak or
insufficient ❏ The TV’s audio might be set to Auto SAP or Mono , when it might be better set
to Stereo . In the Audio Menu (see page 66), set the MTS setting to Stereo . If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external audio speakers ❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to
adjust the sound (see page 66). Or, to use the TV remote control, set the
Audio Out option to Variable.
❏ To turn on the TV speakers, set the Speaker option to On (see page 66).