Sony RDP-XA900iPN - Manual (Page 24)

20 US
1
Press the BLUETOOTH button.
The BLUETOOTH indicator flashes
slowly while the Bluetooth connection is
being established.
2
Start the Bluetooth connection
from the Bluetooth device.
The BLUETOOTH indicator lights up
blue when the Bluetooth connection is
established.
3
Start playback on the Bluetooth
device.
4
Adjust the volume.
Set the volume of the Bluetooth device to
a moderate level, and press the VOLUME
+/– buttons on the unit.
Tips
• You can adjust the volume of the unit via a
Bluetooth device supporting AVRCP (Audio
Video Remote Control Profile) VOLUME UP/
DOWN. For details, refer to the operating
instructions supplied with the device.
• The volume of the unit may not be controllable,
depending on the device.
Notes
• If the source device has a bass boost function or
equaliser function, turn them off. If these functions
are on, sound may be distorted.
• In the following cases, you will need to make the
Bluetooth connection again.
– The power of the unit does not turn on.
– The power of the Bluetooth device does not turn
on, or the Bluetooth function is off.
– The Bluetooth connection is not established.
• If more than one device paired with the unit is
being played back, sound will be heard from just
one of those devices.
To finish listening
Terminate the Bluetooth connection by any of
the operations below.
• Operate the Bluetooth device to terminate
the connection. For details, refer to the
operating instructions supplied with the
device.
• Turn off the Bluetooth device.
• Turn off the unit.