Send by transferjet – Sony DSC-HX7V User Manual
Page 148
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Send by TransferJet
Send by TransferJet
Receiving images using TransferJet
Using separately sold TransferJet-compatible devices
TransferJet is a close-up, wireless transfer technology that allows data to be transferred by
closely aligning two products that you want to communicate with each other.
To find out whether your camera is equipped with the TransferJet function, check for the
(TransferJet) mark on the bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred
between TransferJet-compatible devices.
For more details on TransferJet, see the operating instructions supplied with Memory Stick with
TransferJet.
1.
Insert a Memory Stick with TransferJet into the camera.
2.
Press the
(Playback) button to switch to playback mode.
3.
MENU
(Send by TransferJet)
desired mode
on the control wheel
4.
Transfer images by closely aligning the
(TransferJet) marks on the camera and other
device.
A notification sound is emitted when connection is made.
(This Image)
Sends the currently displayed image in single-image mode.
(Multiple Images)
You can select and send multiple images.
After step 3, perform the following.
Select an image then press
.
Repeat the above step until there are no more images to be sent.
Select an image with a
mark to release the
mark.
MENU
[OK]
Notes
Only still images can be transferred.
Up to 10 images can be transferred at once. However, for 3D images, both the MPO file
and the JPEG file are transferred. Depending on the receiving device, up to 20 images are
received.
Set [TransferJet] to [On] in
(Settings).
On an airplane, set [TransferJet] to [Off] in
. In addition, follow the
rules of the place where you use.
The connection is cut if transfer cannot be made within about 30 seconds. If this happens,
select [Yes] and realign the two
(TransferJet) marks on the camera and another device.
Memory Stick with TransferJet and camera models with TransferJet are not sold in some
countries and regions due to local laws and regulations.
Set the [TransferJet] function to [Off] in countries and regions other than where you
purchased your camera. Depending on the country or region, if you use the TransferJet
function, you may be liable due to local restrictions on transmission of electromagnetic
waves.
148