Sony DSC-HX7V - Manual (Page 155)

Cyber-shot User Guide
Print
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Protect
Protect
To cancel the protection
Protects recorded images against accidental erasure.
The
mark is displayed for registered images.
1.
Press the (Playback) button to switch to playback mode.
2.
MENU (Protect) desired mode on the control wheel
(This Image) Protects the currently displayed image in single-image mode.
(Multiple
Images)
You can select and protect multiple images.
Do as the following after step 2.
Select an image then press .
Repeat the above steps until there are no more images to be protected.
Select an image with a
mark to release the mark.
MENU [OK]
(Set All
Burst Images.)
Protect all images in the selected burst group at once in Display Burst
Group mode.
Press [OK]
after step 2.
(Remove All
Burst Images.)
Release all protected images in the selected burst group at once in Display
Burst Group mode.
Press [OK]
after step 2.
Note
When the internal memory is used to record images, View Mode is set to Folder view.
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing on the
control wheel as the same procedure to protect it. The indicator disappears, and the
protection is released.
Back to top
Copyright 2011 Sony Corporation
155