The supplied AC Adaptor is dedicated to this camera. Do not connect with other electronic
devices. Doing so may cause a malfunction. Also, make sure to use a genuine Sony AC
Adaptor.
If the Power/charge lamp of the camera flashes during charging, remove the battery pack
being charged, and then insert the same battery pack into the camera securely again. If the
Power/charge lamp flashes again, this may indicate a battery error or that a battery pack
other than the specified type has been inserted. Check that the battery pack is the specified
type. If the battery pack is the specified type, remove the battery pack, replace it with a new or
different one and check that the battery is charged correctly. If the battery is charged
correctly, a battery error may have occurred.
If the Power/charge lamp does not light even if the AC Adaptor is connected to the camera
and the wall outlet (wall socket), this indicates that the charging has stopped temporarily and
is on standby. Charging stops and enters standby status automatically when the temperature
is outside of the recommended operating temperature. When the temperature returns to the
appropriate range, charging resumes and the Power/charge lamp lights up again. We
recommend charging the battery pack in an ambient temperature of between 10°C to 30°C
(50°F to 86°F).
Using the supplied AC Adaptor, you can charge the battery pack inserted in the camera. In
addition, power supply via AC Adaptor in playback mode is also available. However, in
shooting mode, power supply via AC Adaptor is not available. You need an AC-LS5 AC
Adaptor (sold separately) and a VMC-MD3 Cable for multi-use terminals (sold separately) to
have a power supply from the wall outlet (wall socket) during shooting.

257

Advertising

Popular Brands

Popular manuals