Burst/bracket – Sony DSC-HX7V User Manual
Page 78
Top page > Shooting > Using shooting functions > Burst/Bracket
Burst/Bracket
You can select Single (single-image), Burst or Bracket as the shooting mode.
1.
Press
(Burst Settings) on the control wheel.
2.
Select the desired mode with the control wheel.
(Single)
The camera shoots a single image.
(Burst)
The camera shoots 10 continuous frames in one burst when you hold down
the shutter button.
(Bracket)
The camera shoots a series of 3 images each with a different setting.
Notes
[Flash] is set to [Off].
When recording with the self-timer, a series of 10 images is recorded if [Burst] is selected
and a series of 3 images, each with different settings, is recorded if [Bracket] is selected.
When [Burst] is selected, [Focus], [White Balance], and [EV ] are adjusted for the first
image, and these settings are also used for the other images.
When the battery level is low, or when the internal memory or a memory card is full, the
burst stops.
[VGA] image size will be set while recording on internal memory.
You may not be able to set some functions or MENU items depending on the selected REC
mode. For details, see “Functions not available in some REC modes”
and “MENU
items not available in some REC modes.”
Related Topic
Burst Shooting Interval
Bracket Setting
Copyright 2011 Sony Corporation
78