Sony EBS-SP10 User Manual
Page 12
SP-TUNE User Manual
11
This menu allows control of various “general” aspects of SP-TUNE behavior. Note that the *-
marked options are accessible only in Service mode, and not in Stand-alone mode.
A/V Input
– Allows user to select the audio/video input source (among the built-in Tuner and
available AV-inputs)
Current time – Allows to set the current time
Timer On
– Allows display turn on time enable/disable and the time at which it occurs
Timer Off
– Allows display turn off time enable/disable and the time at which it occurs
Sleep timer
– Allows user to set the sleep timer
Def. power
– Configures default “power” state when the power is applied to the SP-TUNE (it is
connected to the mains). “Off” means the SP-TUNE will remain in a “sleep” state
after attaching power supply until switched on by IR transmitter command. “On”
means the SP-TUNE will switch on automatically (no need to manually switch
the power on after power supply connection).
8.4 Video
Settings
Brightness
-- Controls the brightness of the picture.
Contrast
-- Controls the contrast of the picture.
Color
-- Controls color saturation (0 corresponds to grayscale picture)
Startup Logo
-- Enabled or disables “logo” picture display after SP-TUNE powering on.