Sony EBS-SP10 - Manual (Page 8)

SP-TUNE User Manual
7
• “VGA”-connector Component (RGB+syncs, RGB with sync on green, or YPbPr) video
input
• Audio inputs/outputs (8pin mini DIN)
• RS-232 port for display control
• Logic input port for current sensors
• IR Output for IR control of devices without RS-232 control
• RGB/YPbPr Output (480i/p signal for display device)
• IR Input for direct connection of IR from remote photo receivers
• IR Sensor (Built in Photo Sensor)
Example of interconnections for a display device, SP-TUNE, VCR (or other source of composite
video), and TV antenna or cable is shown below. Note that standard RCA cables for audio and video
connections, standard S-Video cable, or RF antenna cables are not supplied with the SP-TUNE.
S-Video 4-pin mini-DIN connector is intended for S-Video signal input (VCR, DVD, other signal
source).
The supplied audio input/output adapter cable has labels on cables near RCA connectors, indicating
the purpose of each RCA connector. These labels are:
SVideo Left Audio
SVideo Right Audio
YPbPr Right Audio
YPbPr Left Audio
Video Left Audio
Video Right Audio
Line Out Left
Line Out Right