Sony STR-DA4600ES - Manual (Page 124)

124 GB
x OFF
Does not activate the low-pass filter.
x ON
Always activates the low-pass filter with a
cutoff frequency of 120 Hz.
Lets you output the video input signals from
the HDMI IN jack directly to the HDMI OUT
jack.
x OFF
The input signals from the HDMI IN jack are
output through a video processor.
x ON
The input signals from the HDMI IN jack are
output directly.
Note
Set “Video Direct” to “ON” to receive Adobe
RGB
or
Adobe
YCC601
signals.
Network settings
Makes the settings for the network.
Lets you make the network settings.
To check the network settings
1 Select “Network Setup,” then press
.
2 Select “Network Information,” then
press .
The network setting information of the
receiver is displayed on the TV screen.
To configure network settings
automatically
1
Select “Network Setup,” then press
.
2 Select “Internet Setup,” then press .
3 Select “Connect Automatically
(DHCP),” then press
.
“Success! The receiver is now connected to
network.” appears on the TV screen.
4 Press to select “Finish.”
To set the IP address manually
1 Select “Network Setup,” then press
.
2 Select “Internet Setup,” then press .
3 Select “Manual Configuration,” then
press .
The setting screen for the IP address
appears on the TV screen.
4 Select the IP address, then press .
The soft keyboard appears on the TV
screen.
Video Direct
Network Setup