Sony STR-DA4600ES - Manual (Page 16)

16 GB
Multifunction remote
commander (RM-AAL034)
A AV ?/1 (on/standby)
Press to turn on or off the audio/video
components that the remote is assigned to
operate (page 147).
If you press ?/1 (2) at the same time, it
will turn off the receiver and all other
components including an amplifier in
zone 2 or zone 3 (SYSTEM STANDBY).
Note
The function of the AV ?/1 switch changes
automatically each time you press the input
button (5).
B ?/1 (on/standby)
Press to turn the receiver on or off.
If you press ZONE (3) to switch the
remote to zone 2 (zone 3) mode, you can
turn the power for zone 2 (zone 3) on or
off using ?/1.
C ZONE (page 90)
D AMP
Press to enable the receiver operation for
main zone.
E Input buttons
Press one of the buttons to select the
component you want to use. When you
press any of the input buttons, the receiver
turns on. The buttons are factory assigned
to control Sony components (page 57).
You can program the remote to control
non-Sony components following the steps
in “Programming the remote” (page 147).
F TV INPUT
Press TV (ws), then press TV INPUT to
select the input signal of a TV.
G GUIDE
Press SHIFT (wd), then press GUIDE to
display the on-screen program guide.
H D.TUNING (page 62, 67)
Press SHIFT (wd), then press to enter
direct tuning mode.
I MEMORY
Press SHIFT (wd), then press MEMORY
to enter the Memory mode of the tuner.
J ENTER
Press SHIFT (wd), then press ENTER to
enter the value after selecting a channel,
disc, or track using the numeric buttons,
or to store a station during tuner
operation.
K SOUND FIELD +/– (page 72, 73, 74,
76)
Select a sound field.