Axis Communications AXIS 233D - Manual (Page 28)

28 AXIS 233D - Live View Config
4. Check Show Custom Link 2.
5. Enter a descriptive name, e.g. CAM STOP.
6. Select the Use as cgi link radio button and enter the cgi link in the field:
http://192.168.0.125/axis-cgi/com/ptz.cgi?continuouspantiltmove=0,0
7. These links will appear in the web interface and can be used to control the AXIS 233D.
For more information on the Axis HTTP API, see the Support / Developer pages on the
Axis Web site at http://www.axis.com.
Please use the online help files for more information.
For more information on the Axis HTTP API, see the Support / Developer pages on the
Axis Web site at http://www.axis.com. See also the section on PTZ, on page 11.
Action Buttons
These buttons can be used to manually trigger and stop an event from the Live View page.
The snapshot button allows you to take a snapshot of the video stream and save it to a
computer.
Output Buttons
These buttons are used to control the outputs on the AXIS 233D and thus the equipment
connected to them, e.g. to switch a light on or off:
• The Pulse button activates the port for a defined period
• Active/Inactive displays 2 buttons, one for each action (on/off)
Default Video Format
Select the default video format to use on the Live View page. Checking the box for Show
video format selection displays a drop-down list on the Live View page allowing you to
temporarily change the format.
When using MPEG-4 as the video format, the default viewer is AXIS Media Control with
Internet Explorer.
Note:
It is also possible to view Motion JPEG when MPEG-4 is chosen as default and vice versa.