Axis Communications AXIS 233D - Manual (Page 53)

53 AXIS 233D - I/O terminal Connectors
Power connections
Power can be supplied to the camera by the following methods:
• Connect the supplied indoor power adapter to the power connector block and attach it to the camera
casing. Note that this indoor power adapter provides power for the camera only.
• Connect an outdoor power supply to the power connector block and attach it to the camera casing.
For information on available outdoor power supplies, please visit the Support pages at
http://www.axis.com/techsup/
The power connector block supports both AC and DC input power.
!
IMPORTANT! - When using a DC power supply (included with this product), it is
very important that it is connected correctly to the power block. Make sure the
wire labeled with “
+
” is connected to pin 2 and the remaining wire GND to pin 3.
With an AC power supply either wire can be connected to pin 1 or 2.