Warning indicators and messages, Self-diagnosis display/warning indicators – Sony HDR-FX1000 User Manual

Page 104

Advertising
background image

104

Warning indicators and messages

When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
Some symptoms you can fix by yourself. If
the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.

C: (or E:) ss:ss (Self-diagnosis
display)

C:04:ss

• The battery pack is not an

“InfoLITHIUM” battery pack. Use an
“InfoLITHIUM” battery pack (p. 112).

• Connect the DC plug of the AC

Adaptor to the DC IN jack of your
camcorder securely (p. 18).

C:06:ss

• The battery pack is too hot. Replace the

battery pack, or remove it and put it in a
cool place.

C:21:ss

• Moisture condensation has occurred.

Remove the cassette and leave your
camcorder for at least 1 hour, then re-
insert the cassette (p. 115).

C:22:ss

• Clean the head using a cleaning

cassette (optional) (p. 116).

C:31:ss / C:32:ss

• Symptoms that are not described above

have occurred. Remove and insert the
cassette, then operate your camcorder
again. Do not perform this procedure if
moisture condensation has occurred
(p. 115).

• Remove the power source. Reconnect it

and operate your camcorder again.

• Change the cassette. Press the RESET

button (p. 124), and operate your
camcorder again.

E:61:ss / E:62:ss

• Contact your Sony dealer or local

authorized Sony service facility. Inform
them of the 5-digit code, which starts
from “E.”

101-1001(Warning indicator
pertaining to files)

• The file is damaged.
• The file is unreadable (p. 112).

E

(Battery level warning)

• The battery pack is nearly used up.
• Depending on the operating,

environment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.

%

(Moisture condensation warning)

• Eject the cassette, remove the power

source, and then leave it for about 1
hour with the cassette lid open (p. 115).

(Warning indicator pertaining to

“Memory Stick Duo”)

• A “Memory Stick Duo” is not inserted

(p. 26).

(Warning indicators pertaining to

“Memory Stick Duo” formatting)

• The “Memory Stick Duo” is damaged.
• The “Memory Stick Duo” is not

formatted correctly (p. 80, 111).

(Warning indicators pertaining to

unsupported “Memory Stick Duo”)

• A “Memory Stick Duo” that cannot be

used in your camcorder is inserted
(p. 111).

Self-diagnosis display/Warning
indicators

Advertising