Specifications ( continued) – Sony HDR-FX1000 User Manual

Page 120

Advertising
background image

120

**The unique pixel array of Sony’s

ClearVid CMOS sensor and image
processing system (Enhanced Imaging
Processor) allows for still image
resolution equivalent to the sizes
described.

Output connectors

A/V Remote Connector

10-pin connector
When A/V connecting cable is
connected
Video signal: 1 Vp-p, 75

Ω (ohms)

Luminance signal: 1 Vp-p, 75

Ω (ohms)

Chrominance signal: 0.286 Vp-p (burst
signal), 75

Ω (ohms)

When component A/V cable is
connected
Y: 1 Vp-p, 75

Ω (ohms), P

B

/P

R

, C

B

/C

R

:

+/- 350 mV, 75

Ω (ohms)

Audio signal: 327 mV (at load
impedance 47 k

Ω (kilohms)), Output

impedance with less than 2.2 k

Ω

(kilohms)

HDMI OUT jack

TypeA (19-pin)

i

(headphones) jack

Stereo-minijack (Ø 3.5 mm)

Input/Output connectors

LANC

jack

Stereo mini-minijack (Ø 2.5 mm)

HDV/DV jack

i.LINK interface (IEEE 1394, 4-pin
connector S100)

MIC jack

Stereo-minijack (Ø 3.5 mm)

LCD screen

Picture

8.0 cm (3.2 type, aspect ratio 16:9)

Total dot number

921 600 (1 920 × 480)

General

Power requirements

DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)

Average power consumption

During camera recording using the
viewfinder with normal brightness:
HDV recording 6.4 W
DV recording 6.1 W
During camera recording using the
LCD with normal brightness:
HDV recording 6.6 W
DV recording 6.3 W

Operating temperature

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature

-20 °C to +60 °C (-4 °F to +140 °F)

Dimensions (approx.)

169 Ч 178 Ч 349 mm

(6 3/4

Ч 7 Ч 13 7/8 in.) (w/h/d)

including the projecting parts except for
the grip belt

169 Ч 178 Ч 349 mm

(6 3/4

Ч 7 Ч 13 7/8 in.) (w/h/d)

including the projecting parts with the
battery pack (NP-F570)

Mass (approx.)

2.1 kg (4 lb 9 oz) including the lens
hood with lens cover

2.3 kg (4 lb 15 oz) including the lens
hood with lens cover, battery pack (NP-
F570), cassette (DVM60) and large
eyecup

Specifications (Continued)

Advertising