Sony HDR-FX1000 - Manual (Page 76)

76
When you set this function to [ON], you
can display the audio level meter on the
screen. The default setting is [ON].
You can adjust the brightness of the LCD
screen with the SEL/PUSH EXEC dial.
Changes in the LCD brightness will not
affect the brightness of recording images.
z Tips
• You can also turn off the LCD backlight (p. 22).
You can adjust the LCD color intensity
using the SEL/PUSH EXEC dial. Changes
in the LCD color level will not affect the
color level of recording images.
You can adjust the brightness of the LCD
screen’s backlight.
B NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
b Notes
• When you connect your camcorder to outside
power sources, [LCD BL LEVEL] is
automatically set to [BRIGHT].
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
You can adjust the brightness of the
viewfinder.
B NORMAL
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
B AUTO
Turns on the viewfinder while you close
the LCD panel or record in mirror mode.
ON
Always turns on the viewfinder.
B NORMAL
Displays the menu in regular letter size.
2x
Displays the selected menu items in letter
size, the height of which is doubled.
B AUTO
Displays the remaining time of a tape for
about 8 seconds in the following situation:
• When you set the POWER switch to VCR
or CAMERA with a cassette inserted.
• When you press N (Play) or the
DISPLAY/BATT INFO button.
ON
Always displays the remaining time of a
tape. The remaining time is not displayed
when you insert a new tape or a tape that is
AU.LVL DISP (Audio level display)
LCD BRIGHT
LCD COLOR
LCD BL LEVEL
Audio level meter
VF B.LIGHT
VF POWERMODE
LETTER SIZE
REMAINING
Press the MENU button t select the (DISPLAY SET) with the SEL/PUSH EXEC dial.